Re: Basic Setup: Error connecting to server / Fritz Box
Posted by Sébastien on 2015/2/22 14:41:24
Hi,
The Client tool for PC has to connect to the Enigma-TV Server tool.
This server tool has also to be installed on a PC and must be running all the time.
The Server tool is a bridge between your Box (Dreambox, Vu+, etc ...) and your client devices.
Then the Client tool (like the PC one) connects to the Server tool to control the Box.
The required info for the client tool are :
IP = The IP of your computer when Enigma-TV Server is running on. (or the public Internet IP if you use your router to reditect the web & stream ports)
Web Port = The Local or Public web port that you define in the server tool
Stream port = The Local or Public stream port that you define in the server tool
Password = The password that you define in the Server tool. (the the Dreambox password ...)
Best regards,
The Client tool for PC has to connect to the Enigma-TV Server tool.
This server tool has also to be installed on a PC and must be running all the time.
The Server tool is a bridge between your Box (Dreambox, Vu+, etc ...) and your client devices.
Then the Client tool (like the PC one) connects to the Server tool to control the Box.
The required info for the client tool are :
IP = The IP of your computer when Enigma-TV Server is running on. (or the public Internet IP if you use your router to reditect the web & stream ports)
Web Port = The Local or Public web port that you define in the server tool
Stream port = The Local or Public stream port that you define in the server tool
Password = The password that you define in the Server tool. (the the Dreambox password ...)
Best regards,
This Post was from: http://www.enigma-tv.com/modules/newbb/viewtopic.php?post_id=7173