Re: Media play works, but no video or audio on TV channels

Posted by alllena on 2014/11/20 23:58:37

Hello Sébastien,

Thank you for your continued interest in my problem.
I didn't get time until tonight to make this test, but I have just completed it.

First let me say that the capture of the log (below) is two different channels because I still had one of the LNBs connected to the Nemesis which was recording, so when I connected the Vu+ Uno I selected what the Uno had in memory as the last channel on the same satellite (I have a motorised dish).

Anyway, EnigmaTV worked fine with the Vu+Uno - all I had to do was change the IP address in EnigmaTV, restarted the program, and away it went. No problem. Here is the log from the Vu+Uno:

20/11/2014 23:13:39 :
Zap to BBC One Lon (none)
Sent HTTP command : /web/stream.m3u?1:0:1:189D:7FD:2:11A0000:0:0:0:
Sent HTTP command : /web/stream.m3u?ref=1:0:1:189D:7FD:2:11A0000:0:0:0:&name=nothing
URL with User/Password = http://root:dreambox@192.168.1.92:800 ... 189D:7FD:2:11A0000:0:0:0:
VLC Option 1 = :http-reconnect=true
VLC Option 2 = :program=6301
VLC Option 3 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 79 % , SNR = 71 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 79 % , SNR = 71 %
Sent HTTP command : /web/selectaudiotrack?id=0

Back to the Nemesis, I once again changed the IP address to that of this STB, and restarted the program. Result = not working. Here is the log of that connection:

20/11/2014 23:30:32 :
Zap to Sky News (none)
Sent HTTP command : /web/stream.m3u?1:0:1:1260:7EA:2:11A0000:0:0:0:
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
Sent HTTP command : /web/stream.m3u?ref=1:0:1:1260:7EA:2:11A0000:0:0:0:&name=nothing
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
URL with User/Password = http://root:dreambox@/1:0:1:1260:7EA:2:11A0000:0:0:0:
VLC Option 1 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 99 % , SNR = 60 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 99 % , SNR = 60 %
Sent HTTP command : /web/selectaudiotrack?id=0

Having done this, it throws up something that I think may be interesting...

The IP Address of the Vu+ Uno was = 192.168.1.92
The IP Address of the Nemesis was = 192.168.1.90

However, according to the log the URL with user/password shows something quite different for the Nemesis. Looking back to my forum message giving you the Nemesis log the other day, I see that IP address was not as I would have expected either. Also there was an extra forward slash after the 'at' (arobase).

Does this throw any light onto the problem with your specialised knowledge?

TeamViewer is new to me, but if it helps we can try it, yes. (Just allow that I have 71 years and may be a little slower these days!)

Best regards,