Re: how to set Sky router Model SR102
Posted by badveso on 2015/12/27 15:44:59
What I tried so far is to create service in services section. I gave it name "enigma" and set it to Type: TCP
Start Port: 80
Finish Port:85
In my enigma TV settings 80 is public web port and 85 is Local web port.
My public stream port is 8080 and Local stream port 8085
After creating service I went to Security and firewall rules and tried to set enigma service in IPV6 Firewall (there is no IPV4 settings option). I add enigma to Outbound services to ALLOW always and I did the same in Inbound services when I tried to put in "Send to LAN Server:" section my local stream IP taken from enigma TV settings. This didn't work and I start playing with different settings which I told might be appropriate but no success.
Start Port: 80
Finish Port:85
In my enigma TV settings 80 is public web port and 85 is Local web port.
My public stream port is 8080 and Local stream port 8085
After creating service I went to Security and firewall rules and tried to set enigma service in IPV6 Firewall (there is no IPV4 settings option). I add enigma to Outbound services to ALLOW always and I did the same in Inbound services when I tried to put in "Send to LAN Server:" section my local stream IP taken from enigma TV settings. This didn't work and I start playing with different settings which I told might be appropriate but no success.
This Post was from: http://www.enigma-tv.com/modules/newbb/viewtopic.php?post_id=8350