Re: setup problems
Posted by Mariolone on 2013/8/1 10:20:08
Sébastien
there is an evident (almost for me) problem of mutual understanding: you and me give different meanings to the same words. So if we really want to fix this problem, both of us MUST follow (with no flexibility) simple rules about which both of us agree.I'll give you an example: you say http://YourPublicIP:85 , but it doesnt mean anything (for sure) for me: I have a YourPublicIP locally AND in remote (of course very different) and from where I have to digit that command you dont say for sure...
So first of all:
- Local (locally) means where the decoder is installed
- Remote means where I installed and registered the Software Enigma TV (that cannot connect right now...), in my case is about 30 km. far from the local place.
For all the many other definitions, I'd suggest to have as a guide the definitions present in the settings page of Enigma TV (see enclosed screenshot, taken from the Enigma TV running in local place, connected and with the REAL numeric parameters, reflecting my situation).
That means that you & I cannot say a generic word "local IP" but you & I'd say instead (as an example) "Stream local IP" of ETV running in remote PC & (only if its a command) also specify from where (local or remote) the command must be tested.
Is it clear ? Do you agree Sébastien ?
So I'd suggest to reset everything said till now, and start with these new rules.
Thanks a lot
Mariolone
Attach file:
Dati_Settaggio_Enigma-TV_local_003.jpg (49.63 KB)
there is an evident (almost for me) problem of mutual understanding: you and me give different meanings to the same words. So if we really want to fix this problem, both of us MUST follow (with no flexibility) simple rules about which both of us agree.I'll give you an example: you say http://YourPublicIP:85 , but it doesnt mean anything (for sure) for me: I have a YourPublicIP locally AND in remote (of course very different) and from where I have to digit that command you dont say for sure...
So first of all:
- Local (locally) means where the decoder is installed
- Remote means where I installed and registered the Software Enigma TV (that cannot connect right now...), in my case is about 30 km. far from the local place.
For all the many other definitions, I'd suggest to have as a guide the definitions present in the settings page of Enigma TV (see enclosed screenshot, taken from the Enigma TV running in local place, connected and with the REAL numeric parameters, reflecting my situation).
That means that you & I cannot say a generic word "local IP" but you & I'd say instead (as an example) "Stream local IP" of ETV running in remote PC & (only if its a command) also specify from where (local or remote) the command must be tested.
Is it clear ? Do you agree Sébastien ?
So I'd suggest to reset everything said till now, and start with these new rules.
Thanks a lot
Mariolone
Attach file:
Dati_Settaggio_Enigma-TV_local_003.jpg (49.63 KB)This Post was from: http://www.enigma-tv.com/modules/newbb/viewtopic.php?post_id=2694