I have sent you a PM regarding this.

Best wishes

It's okay. I'm really grateful for the time you've given already. Perhaps in the future.

Best regards.

Hello, and good evening,

Initiating that command in the browser brings this return:


web.Server Traceback (most recent call last):
exceptions.UnboundLocalError: local variable 'args' referenced before assignment
/usr/lib/python2.7/site-packages/twisted/web/server.py:189 in process
188 self._encoder = encoder
189 self.render(resrc)
190 except:
/usr/lib/python2.7/site-packages/twisted/web/server.py:238 in render
237 try:
238 body = resrc.render(self)
239 except UnsupportedMethod as e:
/home/vix2/oe-alliance/builds/openvix/inihdp/tmp/work/xpeedlx3-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+a6f82d726e-r0/git/plugin/controllers/base.py:93 in render
92
93
94
/home/vix2/oe-alliance/builds/openvix/inihdp/tmp/work/xpeedlx3-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+a6f82d726e-r0/git/plugin/controllers/web.py:824 in P_streamm3u
823
824
825
/home/vix2/oe-alliance/builds/openvix/inihdp/tmp/work/xpeedlx3-oe-linux/enigma2-plugin-extensions-openwebif/enigma2-plugin-extensions-openwebif-1+gitAUTOINC+a6f82d726e-r0/git/plugin/controllers/models/stream.py:85 in getStream
84
85
86
exceptions.UnboundLocalError: local variable 'args' referenced before assignment

The Nemesis is very new to me. I remember, in my research, reading that some versions of firmware for the Xspeed LX3 ran on it. I chose to install Egami because it was apparently specially written for the Nemesis and I think was also the forerunner with Multi-Boot images.

Running OpenVIX at the moment, I have spotted several references to XspeedLX3 in the menus. And when I ran OpenMIPS, the flash screen and other parts of the image says GigaBlue and even uses the GigaBlue logo as the spinner!

Using webif this is the URL string that is generated:

http://192.168.1.90:8001/1:0:19:5212:812:2:11A0000:0:0:0:

brings up ITV HD.

I hope this helps. It would be great to get it working.

Best regards,

Hello Sébastien,

Thank you for your continued interest in my problem.
I didn't get time until tonight to make this test, but I have just completed it.

First let me say that the capture of the log (below) is two different channels because I still had one of the LNBs connected to the Nemesis which was recording, so when I connected the Vu+ Uno I selected what the Uno had in memory as the last channel on the same satellite (I have a motorised dish).

Anyway, EnigmaTV worked fine with the Vu+Uno - all I had to do was change the IP address in EnigmaTV, restarted the program, and away it went. No problem. Here is the log from the Vu+Uno:

20/11/2014 23:13:39 :
Zap to BBC One Lon (none)
Sent HTTP command : /web/stream.m3u?1:0:1:189D:7FD:2:11A0000:0:0:0:
Sent HTTP command : /web/stream.m3u?ref=1:0:1:189D:7FD:2:11A0000:0:0:0:&name=nothing
URL with User/Password = http://root:dreambox@192.168.1.92:800 ... 189D:7FD:2:11A0000:0:0:0:
VLC Option 1 = :http-reconnect=true
VLC Option 2 = :program=6301
VLC Option 3 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 79 % , SNR = 71 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 79 % , SNR = 71 %
Sent HTTP command : /web/selectaudiotrack?id=0

Back to the Nemesis, I once again changed the IP address to that of this STB, and restarted the program. Result = not working. Here is the log of that connection:

20/11/2014 23:30:32 :
Zap to Sky News (none)
Sent HTTP command : /web/stream.m3u?1:0:1:1260:7EA:2:11A0000:0:0:0:
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
Sent HTTP command : /web/stream.m3u?ref=1:0:1:1260:7EA:2:11A0000:0:0:0:&name=nothing
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
URL with User/Password = http://root:dreambox@/1:0:1:1260:7EA:2:11A0000:0:0:0:
VLC Option 1 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 99 % , SNR = 60 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 99 % , SNR = 60 %
Sent HTTP command : /web/selectaudiotrack?id=0

Having done this, it throws up something that I think may be interesting...

The IP Address of the Vu+ Uno was = 192.168.1.92
The IP Address of the Nemesis was = 192.168.1.90

However, according to the log the URL with user/password shows something quite different for the Nemesis. Looking back to my forum message giving you the Nemesis log the other day, I see that IP address was not as I would have expected either. Also there was an extra forward slash after the 'at' (arobase).

Does this throw any light onto the problem with your specialised knowledge?

TeamViewer is new to me, but if it helps we can try it, yes. (Just allow that I have 71 years and may be a little slower these days!)

Best regards,

Hi,

I regret that didn't change the situation.
Tomorrow I am going to reconnect my Vu+ Uno just to check if that is still working okay.

Best wishes

Hello again,

Have now tried OpenATV, OpenMIPS, ItalySat, and VIX - I'm afraid none of them solve the problem.

Back to head scratching.

Best regards,

Hello,

I wish I was bringing good news! I have flashed OpenATV image 4.2

I set EnigmaTV to debug mode. Here is the reported log sequence from an attempt to 'reconnect':

19/11/2014 08:45:48 :
Zap to BBC One Lon (none)
Sent HTTP command : /web/stream.m3u?1:0:1:189D:7FD:2:11A0000:0:0:0:
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
Sent HTTP command : /web/stream.m3u?ref=1:0:1:189D:7FD:2:11A0000:0:0:0:&name=nothing
Sent HTTP command : The remote server returned an error: (500) Internal Server Error.
URL with User/Password = http://root:@/1:0:1:189D:7FD:2:11A0000:0:0:0:
VLC Option 1 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 99 % , SNR = 66 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 99 % , SNR = 66 %
Sent HTTP command : /web/selectaudiotrack?id=0

As you can see, I don't have a password set - but then I never did with the Vu+ Uno either (and I had a dual tuner module installed in that, so it was 'multi tuner' also).

NewNigma2 doesn't seem to support the Atemio Nemesis yet, so I couldn't try that image. But I will try the other images I've downloaded, and see if I have any success with any of those.

Best regards,

Thank you for the proposal, Sébastien.

I hadn't mentioned that the image I have been running is 'Egami for Atemio Nemesis' (which allows multi-boot). I haven't used that function, yet. but I have set up downloading OpenATV, OpenMIPS, And Italysat images overnight, and I will test another image tomorrow and let you know what happens.

Best regards,

Hello again,

I tried the VLC 'trick' - unfortunately it hasn't worked.

The version of the VLC ZIP file was 2.1.5 - after restarting EnigmaTV a pop up saying the version of VLC installed was not supported, did I want to continue?
I did continue... and no, still the same problem.
Restarted EnigmaTV again and received the same message, this time I said 'no' I did
not want to continue, and EnigmaTV downloaded "Video Engine (VLC) WIN32 02-May-2012 package".
Restart again... still no TV.

I note it downloaded 'WIN32' and my Windows is 7 64Bit. Is that right?

In deperation I wonder if EnigmaTV utilise any of these functions in my Nemesis:
Samba, DropBear SSH, NPS, FTP, Mini DNLA, Inadyn, uShare, Telnet - all of which have parameters to set if needed.

Webif settings are:
OpenWebInterface Enabled = yes
Show box name in header = yes
HTTP port = 00080
Enable HTTP authentication = no
Enable HTTPS = yes
HTTPS port = 00443
Require client cert for HTTPS = no
Smart Services renaming for XBMC = no
Enable parental control = no
Add service name to stream information = yes

That is where I am. Any further guidance would be appreciated.

Best regards

Thanks. I'll give this a try and report back. :)

Cordialement,