For example:
once understood how the whole system works (and now I can say...Yes, I have understood), I must admit that the pre-announce of Android & iOs Apps misleaded my understanding at that time: infact I thought that Enigma TV was the App (for Android & iOs) in developing stage because, from remote, it was necessary to be installed on the remote device to be able to connect to the decoder...Now I know that's not true...so what kind of Apps are you developing for mobile devices ?
A new sort of browser ? Please let me understand :)

Mariolone

Surprise, surprise...it WORKS !!!!
Thanks again for the support...

Anyway Sebastien...Do you think that a very short manual (just to say: 10-15 lines)shouldn't help a lot ?

Something like:
"Enigma TV is a program that acts as a WEB Server and must be installed in a PC (always running)in the place where is your Decoder. Accessing this Server from a remote PC , connected to Internet & using only a normal Browser, you can browse & watch all the channels of your Decoder, from everywhere in the world."
ETC...

Very simple & very clear...

Best regards

Mariolone

Sorry Guys I am late...thanks to all of you
If you carefully read my post of the 29/7 (22:52)you will find I was guessing:

"Is it perhaps necessary that a local PC is always running to be able to connect from remote ?"

No answer arrived and that's why I was sure it was NOT necessary...


deverbie has understood perfectely my wrong feeling: I was sure that the possibility to connect from remote 'd depend on the use (from remote) of a PC using Enigma tv installed on it: infact I have registered the program installed on remote PC...Now its clear I was totally wrong

Well I 'll try this weekend the totally new approach (its clear now to me) I I'll let you know...

Thanks again to deverbie & Sébastien

Mariolone

Sébastien
there is an evident (almost for me) problem of mutual understanding: you and me give different meanings to the same words. So if we really want to fix this problem, both of us MUST follow (with no flexibility) simple rules about which both of us agree.I'll give you an example: you say http://YourPublicIP:85 , but it doesnt mean anything (for sure) for me: I have a YourPublicIP locally AND in remote (of course very different) and from where I have to digit that command you dont say for sure...
So first of all:
- Local (locally) means where the decoder is installed
- Remote means where I installed and registered the Software Enigma TV (that cannot connect right now...), in my case is about 30 km. far from the local place.
For all the many other definitions, I'd suggest to have as a guide the definitions present in the settings page of Enigma TV (see enclosed screenshot, taken from the Enigma TV running in local place, connected and with the REAL numeric parameters, reflecting my situation).
That means that you & I cannot say a generic word "local IP" but you & I'd say instead (as an example) "Stream local IP" of ETV running in remote PC & (only if its a command) also specify from where (local or remote) the command must be tested.
Is it clear ? Do you agree Sébastien ?
So I'd suggest to reset everything said till now, and start with these new rules.
Thanks a lot
Mariolone

Attach file:

---

  Dati_Settaggio_Enigma-TV_local_003.jpg (49.63 KB)

No way...it doesnt work...
Please Help...

Attach file:

---

  Dati_Settaggio_Enigma-TV_local_002.jpg (51.23 KB)


  Dati_Stato_Connessione_002.jpg (62.60 KB)

Sébastien

when you say "PC(local)" do you mean the local IP address of the "remote" PC ?
It sounds much more reasonable to me...

I'll try something today

Best regards

Mariolone

kk7712 and Sébastien
First of all thanks to all of you !

Sébastien I have only one last question: You say I must redirect the IP of the PC and you add (local)...
Why local ?

When I'll try to connect with a PC in a remote situation, the PC in local (its reasonable) will be off (its unusefull); the remote PC instead will have a totally different IP...
I cant understand, I am very sorry...

Is it perhaps necessary that a local PC is always running to be able to connect from remote ?

Thanks a lot...I'll try tomorrow because I am remote now...

When you say "qui metti l'IP del tuo PC" is it the "192.168.1.22" I gave as an example ? Infact That is not the IP of my PC, but is the IP of the decoder connected with the Modem/Router via WiFi.

And finally: which is the internal port and the external port I has to open ?

Thanks again

Mariolone

Sorry Sebastien, probably I had been too rude...

First question:You say that you can connect locally ... with what ?? With Enigma-TV (the tool on your PC) or with the web interface from Enigma-TV ?
If you carefully read my previous messages, I have already answered this question: I always can connect AND browse either using Enigma TV program (of course installed on a local PC) writing the correct IP on the related box of Enigma parameters OR opening a normal Browser , writing the same IP and connecting without any problem.Only Locally of course.

So, as I can connect locally, you say I have to redirect the local Ports of my Modem/Router to outside.

I am giving you a screen shot of the "Port Mapping" screen of my Modem.

Supposing the correct address is: 192.168.1.22 (its not, but you dont care), what do I have to do (in details please) because I have never done this before.

Thanks in advance

Mariolone

Attach file:

---

  Dati_Port_Mapping.jpg (61.73 KB)

Nobody answers...

Sébastien disappared...

No Manual found...

Videos dont say ANYTHING about the possibility that you cannot connect "remotely" and what to do (or check) if this happens...

Is this program Enigma TV (and this Forum) a HUGE fake ???

At the moment is only a reasonable suspect...