Hi,

The Client tool for PC has to connect to the Enigma-TV Server tool.
This server tool has also to be installed on a PC and must be running all the time.
The Server tool is a bridge between your Box (Dreambox, Vu+, etc ...) and your client devices.
Then the Client tool (like the PC one) connects to the Server tool to control the Box.

The required info for the client tool are :
IP = The IP of your computer when Enigma-TV Server is running on. (or the public Internet IP if you use your router to reditect the web & stream ports)
Web Port = The Local or Public web port that you define in the server tool
Stream port = The Local or Public stream port that you define in the server tool
Password = The password that you define in the Server tool. (the the Dreambox password ...)

Best regards,

Hi there,

I have a question regarding the basic setup of the Enigma TV Media Player on the PC, in the video step 2 it is not described in detail and I didn't find a similar thread in the forum.

When I try to setup the PC client I get the "error connecting to server" message anytime. I already tried many different settings under port releases in the Fritz Box configuration setup.

Could you please tell how the Server IP/ Server Port settings should look like?

Gigablue HD Quad Plus
Fritz Box 7490, OS 06.24

Thanks!