Never had that case before!
What is surprising me is that you can access the web interface and change a channel using it.
The stream starts as well as I see.
But the you cannot catch it, this is too strange.
IOS stream is on the same port than the web stream so it must work, only flash use the stream port.
When you the error message, have you tries to click on the ´reconnect' button on the web interface?

Yes I'm sure the local IP is correct, I manually assigned that one as I needed a static IP for other apps on my PC
No doesn't work on my local network or public network
However I can stream one channel via flash mode and iOS mode both public and local.

But does it work in your local network?
By this, I want to know if activating the 'Internet Control Mode' and using it locally, do you get a video to play on the web media player?
If yes, then the problem is the router... If not, are you sure about the Local IP of yout PC ?

Thanks.

Hi,

Thanks I always try on local network first to rule out any port forwarding issues...

Port 80 is used
I tried 85/8085 at still the same result
I also tried 85/8080 and 8080/8085 and still the same result

I did all test with a non HD channel :(

I see you are using the web interface inside of your network, so port forwarding is not even necessary and it is good that you start your tests inside your local network.
Then, I see you are using non common ports ...
For the tests try using 80 for both local and public web ports and 8080 for the stream ports.
If those are used, try 85 and 8085.
Also do a try on a SD channel.

Tell me the results.

Best regards,

Here's a screenshot of the settings in Enigma, router settings and the error message (attachment tool on the forum didn't work)

http://imgur.com/VDE5FVy
http://imgur.com/0oiVMJA
http://imgur.com/gVhQYoN

Show me the parameters that you set in Enigma-TV Server and also your router port forwarding rules.

Thx.

Hi, I can stream in Flash Mode and iOS mode and they both work perfectly for streaming.
The only issue is internet control mode :(
I'm using a public IP and have forwarded the correct ports in my router (public and local both work for flash and iOS - but not internet control mode)
Thanks

When you are using the Internet Control Mode, is it in iOS mode as well or are you wanting Flash stream?
Is this inside your network or are you using external IP?
If inside the network then it should work in any mode and I would not understand what's going on ...
If outside the network then you need to setup you routee to redirect web and stream ports to you PC where Enigma-TV is running on. This is demonstrated in the help videos, have you seen?

Hope this help.

Best regards,

Hi All'

Looking for some help please

I have enigma tv working for single streams in iOS mode, however when I enable internet control mode the browser opens but I receive the message video not found or access denied when picking a channel

Is there a solution?

thanks