I haven't yet checked the code ...
Sorry for long delay.

In the mean time, have you rebooted the router, PC & iPhone ?
You have the same IP range on the PC and on the iPhone ?

Best regards,

Does anyone else have this problem?

Hi,

Sure, on the Android app you need to specify the stream port because it is different than the we port.
For iOS, the HTTP Live Stream use the same port than the web port ...
I will double-check into the code and correct if necessary.

Best regards,

It works on my android tablet where I can enter the stream port.

I have entered the local ip and I get the channel list. When I select one channel to stream the player starts but I only get a black screen. It timouts after a while back to the channels. I see it changing channel on the server.

Seems like it is trying to connect to the wrong stream port.
From the server: Streaming in progress http://213..myexternalip/stream ... (IPAD IP=1..myinternalip)

My settings
local:80 localstream:8080
external:88 extstream:8088
server and iphone is on the same subnet

Hello,

That should work without any special settings.
The app should detect that the IP you have enterred in the setup is in the same range than your iPhone IP ...
Like if your Enigma-TV local IP is 192.168.1.10 and your iPhone IP is 192.168.1.20 then the code says : 192.168.1(.10) = 192.168.1(.20) and should then build the stream link with those local IP + port.
What if you reboot the phone ? or the router ?

Best regards,

I can't get the Apple player to work on my local network.
It works fine over internet on 3g. Is there a special setting for this to work?