Very good !

I got it working now on my asus N66U

Joindre un fichier:

---

  asus_working.jpg (13.15 KB)

Hi

Can you please take a look on the pictures and see if you see something wrong?
I got a new asus router and ports will not work...

Joindre un fichier:

---

  asus.jpg (15.75 KB)


  modem.jpg (19.75 KB)


  etv_settings.jpg (43.29 KB)

OK great !
Sometimes images are not 100% working ...

Best regards,

Changed image from openpli to Vix. same 404 and 500 error but it works now ;)

OK, check on your image if the stream is maybe password protected ...
If yes then deactivate that option !
That is the only possible cause from what i can see.

Best regards,

ok, sorry.. I ment local pc ip 192.168.1.115 is corrct...

Startup log

Selected Profile File Found !
Profile Name = VuZero

--------------------
Found Some Profile(s) !
Profile 1 : VuZero
Copied channels.csv for profile VuZero
Sent HTTP command : /body?mode=help
Sent HTTP command : Den eksterne serveren returnerte feilen (404) Finner ikke filen.
Sent HTTP command : /web/deviceinfo
Sent HTTP command : /web/getservices?sRef=1:7:1:0:0:0:0:0:0:0:(type == 1) || (type == 17) || (type == 195) || (type == 25) FROM BOUQUET "bouquets.tv" ORDER BY bouquet
Sent HTTP command : /web/getservices?sRef=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.vh91.tv" ORDER BY bouquet
Sent HTTP command : /web/getlocations
Sent HTTP command : /web/timerlist
Sent HTTP command : /web/movielist?dirname=/hdd/movie/
Sent HTTP command : Den eksterne serveren returnerte feilen (500) Intern serverfeil.

Got no HDD in vuZero.
What is error 404? password is correct.. hmmmm...

Here is a log from a connection from outside:

08.04.2015 20:20:40 :
Zap to BBC World News (none)
Sent HTTP command : /web/zap?sRef=1:0:1:5E4:1:46:E080000:0:0:0:
Sent HTTP command : /web/stream.m3u?1:0:1:5E4:1:46:E080000:0:0:0:
Sent HTTP command : /web/stream.m3u?ref=1:0:1:5E4:1:46:E080000:0:0:0:&name=nothing
URL with User/Password = http://root:passwd@192.168.1.235:8001 ... 1:5E4:1:46:E080000:0:0:0:
VLC Option 1 = :http-reconnect=true
VLC Option 2 = :program=1508
VLC Option 3 = :audio-track=1
Sent HTTP command : /web/signal
AGC / SNR check 1 : AGC = 86 % , SNR = 98 %
Sent HTTP command : /web/signal
AGC / SNR check 2 : AGC = 86 % , SNR = 97 %
Sent HTTP command : /web/selectaudiotrack?id=0

Write "lost video, trying to reconnect" and this repeat over and over again.

Anyway.. Thanx for the help. When I find out I will let you know..

I'm not talking about your DSL IP ...
You should check the local IP's set in Enigma-TV, those have maybe changed on your VU+ or your PC itself ...
No other ideas, sorry ..

Best regards,

Hi
Ip address is ok, and the port is ok after a check on canyouseeme.org.
I disabled firewall. still no go. I can access webinterface. when I change channel it switching channel, but says after a while, reconnect and cant play video.

I also can't watch video from the "TV-controll" section. the same error accour. So something wired is going on.

I got a VU+ Zero with open pli image.
I got a windows pc with two users...

I will try re-install Enigma-tv

Regards

Gartner

Hi,

Setup looks OK ...
Are you sure of the IP of the PC ? (sometimes the function that get the PC IP doesn't work properly ...)
Try to get it from a 'cmd ipconfig /all to check all' network IP's.

Best regards,